Peroxide-Cure EPR Compound Pellets
Uncured, peroxide-cure EPR compound in extruder-ready pellets: mineral-filled, flame-retardant and built for heat and weather.
Also sold as: EPR pellets, Ethylene propylene rubber (EPR / EPM) compound, Medium-voltage insulation grade EPR, Peroxide-curable EPR compound
- Polymer
- EPR (ethylene propylene rubber)
- Cure
- Peroxide, uncured
- Form
- Pellets
- Supply
- Full & partial truckloads
Or call 888-679-9533
EPR (ethylene propylene rubber) is the rubber chosen for medium-voltage electrical insulation because it holds up to heat, ozone, moisture and aging. This is fully mixed, peroxide-cure EPR compound with a mineral filler and flame-retardant package, pelletized and uncured. It went off spec for dispersion, a property that matters for precision insulation layers but not for the bulk physical properties of molded and extruded parts, so it gives you a high-performance EPR compound at off-spec cost. Lots are recent production, mostly orange, with white, black and blue available.
Specs & packing
- Polymer
- EPR compound, medium-voltage insulation grade
- Cure system
- Peroxide (uncured as supplied)
- Hardness
- About 90 Shore A, fully cured
- Tensile
- About 2,200 psi typical, with strong retention after heat aging
- Fillers
- Mineral-filled, flame-retardant
- Form
- Pellets, extruder-ready, no size reduction needed
- Colors
- Mostly orange; white, black and blue available
- Packing
- Palletized or in gaylord boxes
- Supply
- Full and partial truckloads, delivered anywhere in the USA and Canada
- Documents
- COA and SDS with every lot
- Note
- Off-spec material: properties vary from lot to lot. Photos and typical values come with every offer.
Applications
- Peroxide-cure molded and extruded parts
- Roofing membranes and building membrane accessories
- Industrial gaskets, seals and window gaskets
- HVAC duct seals and electrical conduit gaskets
- Industrial hose covers and vibration dampeners
- Fire-rated transit and marine components
- Functional, flame-retardant filler in other rubber compounds
EPR Compound Pellets: common questions
What is EPR?+
EPR is ethylene propylene rubber, a copolymer of ethylene and propylene (also called EPM). It is the standard insulation rubber for medium- and high-voltage power cable because it resists heat, ozone, moisture and aging. EPDM is the same family with a diene added so it can also be sulfur cured.
EPR or EPDM: what is the difference?+
EPR has no diene, so it cures with peroxide only and has excellent heat and electrical properties. EPDM adds a small amount of diene so it can be sulfur cured as well. For general molded and extruded parts the two behave much alike; choose EPR when you already run a peroxide cure. EPDM compound
Is it cured?+
No. The pellets are uncured, with the peroxide cure system already mixed in, so they can be extruded or molded and cured in your own process.
Why is it off spec?+
It missed a dispersion target set for precision cable insulation. Tensile, elongation, cure and aging properties tested within the original specification, and the COA comes with every lot.
Can it be used with sulfur-cure compounds?+
EPR does not co-cure with sulfur systems, but it can go into sulfur-cure compounds as a functional filler. Ask us and we share what works.
Are there compliance notes?+
Yes. Like many cable insulation compounds it contains a lead-based cure activator. Check RoHS, REACH and any customer requirements for your end use; the SDS comes with every lot.
Have off-spec EPR or EPDM compound?
We take production-excess and off-spec EPR and EPDM compound, pellets and masterbatch from mixing and manufacturing plants, one-off lots or by the truckload. Send photos and we make you an offer for the load.
