Butyl Reclaimed rubber sheets

Highly quality Butyl reclaim rubber

 

BUTYL RECLAIM PRODUCT INFO.

  • Derived exclusively from Butyl rubber inner tubes
  • Guaranteed metal free, homogenous lots with consistent properties
  • 100+ PSI Tensile strength, 480% EB
  • Rubber hydrocarbon 50% or higher
  • NON-Aromatic oils used in minimal % for reclaim rubber production

 

RECLAIMED RUBBER MANUFACTURING INFO

  • REACH Compliant, with SVHC and PAH test reports available
  • Commercial scale Monthly production of 2000+ metric tons as of 2016
  • ISO 9001-2008 Certified manufacturing plants
  • Plants successfully audited and approved by customers
  • Exclusive, completely separate production facilities for Tire reclaimed rubber and Butyl reclaimed rubber

 

BUTYL RECLAIMED RUBBER PHYSICAL PROPERTIES

 

Product code:BUTYL #501
Derived from:100% Butyl rubber inner tubes
TENSILE (PSI)1000+
HARDNESS SHORE A45 +/- 5
MV ML(1+4) @ 212 °F40 – 60
ELONGATION %min 480
SP. GRAVITY1.15
Rubber hydrocarbon %min 50
Acetone Extract %13 +/- 3
Ash Content %4 +/- 2
Carbon black %min 27
Volatile matter %max 1

 

BUTYL RECLAIMED RUBBER CHARACTERISTICS

 

Product info.● Extruded black slab rubber sheets / strips, derived from butyl ribber inner tubes
● Doesn’t stick to mills or mixers. No offensive odors
● Free of metal, consistent properties lot by lot
● All lots certified and shipped with COAs
Applications:Tire inner liners, hoses, cables, butyl rubber inner tubes, adhesives molded and extruded rubber parts, rubber liners and sheets
Packing● Extruded slabs, separated by low melt point EVA bags
● Labeled and streteched wrapped on plastic pallets
● Bulk packing or 50 lb. low melt point EVA bags, for easy handling
Characteristics● Mixes fast, without sticking, during banbury / mill mixing in one or two pass mixing cycles
● Compounds with other elastomers, oils, carbon black, processing aids, accelerators & sulfur
● Can be used as replacement or filler. Blend or stand­alone polymer, low cost masterbatch
● Maintains aging properties and compound viscosity

 

EPDM RECLAIM SLAB RUBBER SHEETS PHOTOS:

 

 

 

read more

EPDM Reclaimed rubber sheets

Highly quality, single polymer EPDM reclaim rubber

 

EPDM RECLAIM PRODUCT INFO.

  • Derived exclusively from EPDM automotive weatherstrips
  • Guaranteed metal free, homogenous lots with consistent properties
  • Hardness 55 to 60, Shore A based on grade of reclaimed rubber
  • Elongation 250% on high tensile reclaim rubber
  • Rubber hydrocarbon 47% or higher
  • NON-Aromatic oils used in minimal % for reclaim rubber production

 

RECLAIMED RUBBER MANUFACTURING INFO

  • REACH Compliant, with SVHC and PAH test reports available
  • Commercial scale Monthly production of 2000+ metric tons as of 2016
  • ISO 9001-2008 Certified manufacturing plants
  • Plants successfully audited and approved by customers
  • Exclusive, completely separate production facilities for Tire reclaimed rubber and Butyl reclaimed rubber

 

EPDM RECLAIMED RUBBER PHYSICAL PROPERTIES

 

Product code:EPDM #702
Derived from:EPDM automotive weather strips
TENSILE (PSI)853+
HARDNESS SHORE A55 +/- 5
MV ML(1+4) @ 212 °F30-45
ELONGATION %min 300
SP. GRAVITY1.14 +/- 0.02
Rubber hydrocarbonmax 30
Acetone Extract30 +/- 5
Ash Contentmax 20
Carbon black25 +/- 5
Volatile mattermax 1

 

EPDM RECLAIMED RUBBER CHARACTERISTICS

 

Product info.● Extruded black slab rubber sheets / strips
● Doesn’t stick to mills or mixers. No offensive odors
● Free of metal, consistent properties lot by lot
● All lots certified and shipped with COAs
Applications:Tire inner liners, industrial hoses, engineered rubber compounds, molded and extruded rubber parts, conveyor belting, battery rubber containers, shoe soles, rubber liners and sheets
Packing● Extruded slabs, separated by low melt point EVA bags
● Labeled and streteched wrapped on plastic pallets
● Bulk packing or 50 lb. low melt point EVA bags, for easy handling
Characteristics● Mixes fast, without sticking, during banbury / mill mixing in one or two pass mixing cycles
● Compounds with other elastomers, oils, carbon black, processing aids, accelerators & sulfur
● Can be used as replacement or filler. Blend or stand­alone polymer, low cost masterbatch
● Maintains aging properties and compound viscosity

 

EPDM RECLAIM SLAB RUBBER SHEETS PHOTOS:

 

 

 

read more

Whole tire reclaimed rubber

Highly refined, whole tire reclaimed rubber products

 

WHOLE TIRE RECLAIMED RUBBER PRODUCT INFO. (NR)

  • Choice of three grades, high tensile 1067+ PSI, medium tensile or standard tensile
  • Hardness 55 to 60, Shore A based on grade of reclaimed rubber
  • Elongation 250% on high tensile reclaim rubber
  • Rubber hydrocarbon 47% or higher
  • NON-Aromatic oils used in minimal % for reclaim rubber production
  • Derived exclusively from nylon bias ply tires and metal free rubber buffings

 

RECLAIMED RUBBER MANUFACTURING INFO

  • REACH Compliant, with SVHC and PAH test reports available
  • Commercial scale Monthly production of 2000+ metric tons as of 2016
  • ISO 9001-2008 Certified manufacturing plants
  • Plants successfully audited and approved by customers
  • Exclusive, completely separate production facilities for Tire reclaimed rubber and Butyl reclaimed rubber

 

PHYSICAL PROPERTIES

 

HIGH TENSILE

WTR RECLAIMED RUBBER

MEDIUM TENSILE

WTR RECLAIMER RUBBER

STD. TENSILE

WTR RECLAIMED RUBBER

All grades of tire reclaimed rubber derived exclusively from nylon tires & buffings
TENSILE1067+640+570+PSI
HARDNESS55 +/- 560 +/- 360 +/- 3SHORE ‘A’
MV ML(1+4)
@ 212 °F
40 — 6025 — 5525 — 55MU
ELONGATIONMin 250Min 230Min 200%
SP. GRAVITYMax 1.151.12 +/- 0.021.12 +/- 0.02
PRODUCT CODE#704#504#522

 

 

TIRE RECLAIMED RUBBER CHARACTERISTICS:

 

Product info.● Extruded black slab rubber sheets / strips
● Doesn’t stick to mills or mixers. No offensive odors
● Free of metal, consistent properties lot by lot
● All lots certified and shipped with COAs
Applications:Tire compounds, engineered rubber compounds, molded and extruded rubber parts, conveyor belting, battery rubber containers, shoe soles, rubber liners and sheets
Packing● Extruded slabs, separated by low melt point EVA bags
● Labeled and streteched wrapped on plastic pallets
● Bulk packing or 50 lb. low melt point EVA bags, for easy handling
Characteristics● Mixes fast, without sticking, during banbury / mill mixing in one or two pass mixing cycles
● Compounds with other elastomers, oils, carbon black, processing aids, accelerators & sulfur
● Can be used as replacement or filler. Blend or stand­alone polymer, low cost masterbatch
● Maintains aging properties and compound viscosity

 

Tire derived reclaimed and fully de-vulcanized slab rubber product photos

 

 

 

 

Please contact us for samples and availability.

 

 

read more

Natural rubber reclaim / NR reclaimed

Replace virgin NR with natural rubber reclaim.

 

Description: Natural rubber reclaim, fully de-vulcanized, 100% metal free, low cost replacement of virgin Natural rubber. It’s consistent in price and properties.

Usage: Can be used as stand-alone polymer masterbatch with accelerators and sulfur for low-cost rubber compound manufacturing. Used for technical rubber products, bumpers, mats, gaskets, pads, wheels, tread rubber and shoe sole applications.

 

NATURAL RECLAIMED RUBBER CHARACTERISTICS:

  • Fully Un-cured, un-accelerated NR rubber in masterbatch form
  • Homogeneous product, lot by lot.
  • Clean & free of contaminants
  • Very consistent material properties
  • No offensive odors
  • Doesn’t stick to mills or mixers
  • Non-tirem, single polymer masterbatch with carbon black and oil

 

Typical Physical Properties (NR model compound)

NR-F32 de-vulcanized rubber masterbatch can be easily compounded with other elastomers, oils, carbon black, processing aids, accelerators, and sulfur in internal mixers or two roll mills in one or two pass mixing cycles. Below formula for natural reclaimed rubber made into a ready to use NR compound with addition of accelerators, sulfur, and small amounts of carbon black, and processing aids.

 

Physical Properties of NR model compound

Cured @150C t90 +5’

Hardness Shore A

75

Tensile Strength (Mpa)

6.0

Elongation at Break (%)

93

Specific Gravity (gm/cm3)

1.13

Compression Set (%)

29

 

Rheometric

Cured @150C

t01 seconds

65

t90 seconds

235

MH lb-in..

6.38

ML1 + 4@100C

41.5


Packaging for NR rubber masterbatch / compound. 

Available in extruded 30 kg coils (approx). Thick ¾” X 6” wide. Forty coils per skid. Product covered with EVA black bags, polyethylene wrapped, and banded.

 

NR RECLAIMED RUBBER PHOTOS

 

Please contact us if you are looking for a USA based distributor for rubber masterbatch. We deliver to all states within North and South America.

 

read more